Illustrated Guide to Safe Riding, Legal Compliance and Daily Maintenance
1. Pre-Ride Inspection (Must-Do Before Every Use)
Visual Suggestion: Image of a person checking scooter parts (brakes, tires, battery, handlebars)
Check the battery level: Ensure the battery is fully charged and the indicator works properly; avoid riding with a low battery to prevent sudden power loss.
Inspect tires and wheels: Check for tire wear, punctures, or loose spokes; keep tires inflated to the recommended pressure for stable riding.
Test brakes and throttle: Squeeze both front and rear brakes to confirm responsive stopping; test the throttle to ensure smooth acceleration with no glitches.
Tighten loose parts: Check handlebars, folding mechanism, and foot deck for wobbles; secure all screws and bolts to avoid accidents.
Check lights and reflectors: Test front/rear lights, brake lights and side reflectors—critical for low-light and night riding.
2. Essential Safety Gear (Non-Negotiable for All Riders)
Wear a certified helmet: Always put on a properly fitted, impact-resistant helmet to protect against head injuries (required by law in most regions).
Add protective padding: Wear knee pads, elbow pads and wrist guards to reduce injury risk from falls.
Choose visible clothing: Wear bright-colored or reflective apparel, especially at dawn, dusk or night; avoid loose clothes that may get caught in wheels.
Wear closed-toe shoes: Never ride barefoot or in sandals/slippers; sturdy shoes improve grip and protect feet.
3. Safe Riding Rules & Traffic Compliance
Visual Suggestion: Infographic showing scooter riding lanes, hand signals, and traffic etiquette
Follow local traffic laws: Check age restrictions, speed limits, and allowed areas (most cities ban e-scooters on sidewalks, highways and busy pedestrian zones).
Stick to designated lanes: Ride in bike lanes or slow-speed vehicle lanes; stay on the right side of the road and avoid weaving in and out of traffic.
Control your speed: Reduce speed in crowded areas, crosswalks, ramps and wet surfaces; maximum speed should match road conditions (never exceed manufacturer limits).
Stay alert and focused: No phone use, headphones or distractions while riding; watch for pedestrians, cars, potholes and obstacles at all times.
Use hand signals: Signal turns and stops with clear hand gestures to communicate with other road users.
Avoid reckless behavior: No tandem riding (carrying passengers), no stunts, and no riding under the influence of alcohol or drugs.
Illustrated Guide to Safe Riding, Legal Compliance and Daily Maintenance
1. Pre-Ride Inspection (Must-Do Before Every Use)
Visual Suggestion: Image of a person checking scooter parts (brakes, tires, battery, handlebars)
Check the battery level: Ensure the battery is fully charged and the indicator works properly; avoid riding with a low battery to prevent sudden power loss.
Inspect tires and wheels: Check for tire wear, punctures, or loose spokes; keep tires inflated to the recommended pressure for stable riding.
Test brakes and throttle: Squeeze both front and rear brakes to confirm responsive stopping; test the throttle to ensure smooth acceleration with no glitches.
Tighten loose parts: Check handlebars, folding mechanism, and foot deck for wobbles; secure all screws and bolts to avoid accidents.
Check lights and reflectors: Test front/rear lights, brake lights and side reflectors—critical for low-light and night riding.
2. Essential Safety Gear (Non-Negotiable for All Riders)
Wear a certified helmet: Always put on a properly fitted, impact-resistant helmet to protect against head injuries (required by law in most regions).
Add protective padding: Wear knee pads, elbow pads and wrist guards to reduce injury risk from falls.
Choose visible clothing: Wear bright-colored or reflective apparel, especially at dawn, dusk or night; avoid loose clothes that may get caught in wheels.
Wear closed-toe shoes: Never ride barefoot or in sandals/slippers; sturdy shoes improve grip and protect feet.
3. Safe Riding Rules & Traffic Compliance
Visual Suggestion: Infographic showing scooter riding lanes, hand signals, and traffic etiquette
Follow local traffic laws: Check age restrictions, speed limits, and allowed areas (most cities ban e-scooters on sidewalks, highways and busy pedestrian zones).
Stick to designated lanes: Ride in bike lanes or slow-speed vehicle lanes; stay on the right side of the road and avoid weaving in and out of traffic.
Control your speed: Reduce speed in crowded areas, crosswalks, ramps and wet surfaces; maximum speed should match road conditions (never exceed manufacturer limits).
Stay alert and focused: No phone use, headphones or distractions while riding; watch for pedestrians, cars, potholes and obstacles at all times.
Use hand signals: Signal turns and stops with clear hand gestures to communicate with other road users.
Avoid reckless behavior: No tandem riding (carrying passengers), no stunts, and no riding under the influence of alcohol or drugs.